Piping Pipeline Integrity Design & Maintanance

neotalentatraining — Mon, 19 Feb 2024 04:40:00 +0000

PIPING & PIPELINE INTEGRITY DESIGN & MAINTENANCE

Descrption

Design of oil pipelines and/or natural gas pipelines involve the application of mass, energy and force balances, material selection, line sizing, topography and elevation gradients, working pressure, pressure drop, and the related parameters such as erosional velocity, friction factor, flashing, condensation, corrosion, scaling, deposition, and multiphase flow problems. There is no a single approach to pipeline integrity. Mechanical, civil, chemical, metallurgical, unit operations and many other interrelated factors are the basis of the whole design.

This pipeline integrity design based on standards, codes and recommended practices, especially that of the API, ASME, ANSI, ASTM, NACE, and all good and common practices. Integrity of the pipeline must be considered from the beginning of the design, to assure that the line is able to operate without failure. The installed pipeline must be in the low risk category. Protection for anticipating internal and external damage must be included in calculation.

Pipeline failure may lead to disaster; fire, explosion, or poisoning. So that, safety is the most importance in pipeline. For that reason, safety considerations will be placed as the first in the pipeline integrity design.

Objective

After completion of this course, participants will be able to:

Broaden or reshape their knowledge on the related subjects of his or her area of responsibility, discuss and consult their speciic problems in pipeline operationa they are about to bring to the class and share their experiences with thers.

Understand the concept of and approach to pipeline integrity and pipeline design, howto determine pipe diameter and wall thickness, either for oil & gas or produced water, how to select the pipe material, what and how to calculate, all based on common standards and good practices.
know what kind of problems may happen in daily pipeline operation, how to rank the risk categories, what to do to mitigate the risks, and how to avoid problems from the beginning.

Course Content

Surface Production Operations, Facility, and Equipment, and the Asset Management
Hazard Assessment for Effective Pipeline Integrity Management
Safety Considerations and Pipeline Failure Mitigation Control Requirements
Pipeline Design Standards, Codes and Recommended Practices
Pipeline Sizing, Wall Thickness Criteria, and the MAWP
Corrosion Allowance and the Remaining Service Life
Pipe Material Specification and Standard Dimension
Free Span Pipe; Layout, Elevation and Topography
Pipeline Design Calculation; Design and Operating Pressures
Pipe Material Requirement, Examination, Testing and Inspection
Pipeline Integrity Systems and Risk Assessment
Examples and Case Studies

Instructor

Ir. Rini Dharmastiti, M.Sc., P.hD. & Team

Praktisi Bidang Engineering

Participants

This course is prepared as an effective practical shortcut to understand pipeline integrity design, for either junior engineer or non-pipeline-engineering personnel who involve in oil & gas operations, maintenance, design, asset integrity management, or other function, and any related business activity, whatever his or her background is.

The course content and approach are designed to suit participants of different background and different position in the company. It will be delivered as a to-the-point explanation by a professional instructor, utilizing an easy-to-understand examples, illustrations, and experiences.

Time and Venue

DATE : 20 sd 22 Mei 2024

TIME : 08.00 – 16.00

VENUE : Yogyakarta

Course Fee

Rp 8.500.000 per peserta (Non Residential)

Facilities

Qualified instructor
Training Module
Certificate Neo Talenta Consulting
Training Photo
Training room with full AC facilities and multimedia
Once lunch and twice coffeebreak every day of training

Information

Jl. K. H. Ali Maksum, Sewon, Bantul, Yogyakarta 55188

Phone |0274 – 4531080

Email | anto.neotalenta@gmail.com

Website |www.neotalenta.com

The post Piping Pipeline Integrity Design & Maintanance appeared first on .

Training Basic Mechanical

neotalentatraining — Fri, 10 Feb 2023 03:06:00 +0000

TRAINING BASIC MECHANICAL

Deskripsi

Ilmu Teknik bidang Teknik Mesin (Mechanical Engineering) merupakan salah satu pendukung utama berkembangnya dunia industri dan otomasi, sehingga penguasaan yang memadai di bidang Mechanical Engineering merupakan syarat mutlak untuk dapat menangani peralatan-peralatan industri baik khususnya bagi seorang Engineer, Technician atupun Operator. Namun tak jarang pula para teknisi maupun operator bukan dari latar belakang teknik, sehingga manajemen perlu meng-upgrade skill mereka agar mampu memenuhi standar kompetensi yang diharapkan.

Mechanical Engineering merupakan cabang ilmu teknik yang berpijak terutama antara lain pada ilmu-ilmu Matematika, Kinematika Dinamika, Material, Mekanika Material, Mekanika Fluida, Mekanika Panas,Thermodinamika dan Teknik Pengukuran serta Teknik Pengendalian. Kursus singkat ini mendiskusikan dasar-dasar ilmu di atas termasuk penerapannya di bidang Mechanical Engineering. Selesai mengikuti kursus ini peserta diharapkan lebih memahami dasar-dasar ilmu Mechanical sehingga semakin memahami cara menangani peralatan industri baik dari segi desain konstruksi, pengoperasian dan pemeliharaan.

Materi

Ilmu Material Dasar (Ferrous dan non Ferrous dan treatment)
Konsep Mekanika Dasar
Dasar-dasar Mekanika Material
Dasar-dasar Kinematika Dinamika dan penerapannya
Dasar-dasar Mekanika Fluida dan penerapannya
Dasar-dasar Thermodinamika dan penerapannya
Perpindahan Panas Dasar
Dasar-dasar Teknik Pengukuran dan Pengendalian

Instruktur

Ir. Y. Agus Jayatun, MT.,IPP.

Adalah lulusan dari teknik mesin UGM. Saat ini Beliau mengabdikan ilmunya di STTNAS Yogyakarta. Berpengalan sebagai instruktur untuk training-training di bidang kompetensinya, seperti: Centrifugal Pump Operation and Maintenance, Compressor Operation and Maintenance, Boiler, Maintenance Management, Total Alignment and Balancing, Mechanical Power Transmision, Pipeline design, construction and maintenance, Control Valve, design, operation and maintenance, Rotating Equipment dll. Dalam dunia praktis, beliau berpengalaman bekerja di beberapa perusahaan antaralain sebagai, Mechanical and Electrical Site Engineer, M/E. Site Engineer pada Process of Clean Water Instalation, M/E. Site Engineer pada Office Building of PLN, Supervisor M/E Engineer, Mechanical Engineer pada Detail Engineering Design of Non Liquid Waste of Komplek Industri Kulit dan masih banyak yang lainnya. Beliau memiliki beberapa sertifikasi profesional dari PII dalam bidang Plumbing/Piping, Air Conditioning, Indoor Building Transportation, Mechanical, dan electrical.

Ir. Rini Dharmastiti, M.Sc., P.hD. & Team

Praktisi Bidang Engineering

Participants

Kegiatan ini dapat diikuti oleh para pekerja yang akan disiapkan untuk menjadi Operator, Technician, Junior Engineer atau semua pihak yang ingin memahami atau mendalami bidang mekanikal level basic yang diaplikasikan pada dunia industri.

Time, Venue

DATE : Tentative By Request